Model HR903-AF-42Y
Marked retail price, inclusive of applicable terms
Four 10/100M PoE ports plus two 100M uplinks, 802.3af/at at up to 30W per port, 48W internal supply and a VLAN isolation mode that extends a run to 250 metres.
The HR903-AF-42Y is an entry-level unmanaged PoE switch for a small camera or access-point install: four powered 10/100M ports for the devices themselves and two 100M uplink ports to carry the traffic back to a router or a larger switch.
Power over Ethernet means each camera takes its power down the same Cat5e or Cat6 run that carries its data, so there is no need for a socket at the camera end. The 48W budget is the figure to plan against: four typical 2MP bullet cameras draw roughly 5-8W each and fit comfortably, but two 30W pan-tilt-zoom domes would use most of it. The extend mode trades speed for distance, dropping the link to 10Mbps so it will reach past the usual 100-metre Ethernet limit to around 250 metres, which is enough for a gate or a boundary wall camera. VLAN mode isolates the downlink ports from one another so a compromised camera cannot see its neighbours.
4-Port 10/100M PoE Switch with 2 Fast Ethernet Uplinks
NPR 2,200