Model NSW2010-6T-POE-S-IN
60W total PoE budget, 30W per port, 1.2Gbps switching capacity, 250 m extend mode.
The 4+2 Uplink Unmanaged Ethernet Switch(PoE) (NSW2010-6T-POE-S-IN) is an unmanaged Ethernet switch with PoE. It powers cameras and access points over the same cable that carries their data, which is the normal way to build a CCTV network.
The PoE budget is the number to size against. A typical fixed IP camera draws 4-8 W, a camera with heaters, a PTZ motor or bright supplementary lighting rather more. Total the draw of everything you intend to connect and leave headroom above it — an over-budget switch drops ports, usually the last one to come up.
An unmanaged switch has no configuration to get wrong: plug it in and it forwards. The trade-off is no VLANs, no port mirroring and no remote power-cycling of a stuck camera.
Extend mode pushes a PoE run to about 250 m, well past the usual 100 m Ethernet limit, at reduced speed. It is a useful escape when a camera sits just too far away for a clean run.
IP and analogue cameras, NVRs, XVRs and structured cabling.
4+2 Uplink Unmanaged Ethernet Switch(PoE)
NPR 1,890 3,150