Model NSW2020-8T2GT-LPOE-IN
65W total PoE budget, 30W per port, 5.6Gbps switching capacity, 250 m extend mode.
The 8+2 Uplink Unmanaged Ethernet Switch(PoE) (NSW2020-8T2GT-LPOE-IN) is an unmanaged Ethernet switch with PoE. It powers cameras and access points over the same cable that carries their data, which is the normal way to build a CCTV network.
The PoE budget is the number to size against. A typical fixed IP camera draws 4-8 W, a camera with heaters, a PTZ motor or bright supplementary lighting rather more. Total the draw of everything you intend to connect and leave headroom above it — an over-budget switch drops ports, usually the last one to come up.
This is the low-power variant of the model. It costs less and carries a smaller total PoE budget than the standard version with the same port count, so it fits sites running modest fixed cameras rather than heated or motorised ones.
An unmanaged switch has no configuration to get wrong: plug it in and it forwards. The trade-off is no VLANs, no port mirroring and no remote power-cycling of a stuck camera.
Extend mode pushes a PoE run to about 250 m, well past the usual 100 m Ethernet limit, at reduced speed. It is a useful escape when a camera sits just too far away for a clean run.
IP and analogue cameras, NVRs, XVRs and structured cabling.
8+2 Uplink Unmanaged Ethernet Switch(PoE)
NPR 4,500 7,500